data brief rev 1 october 2005 1/3 3 ST7MDT10-32/dvp sdip32/so28 connection kit for st7mdt10-dvp3 the sdip32/so28 connection kit (st7 mdt10- 32/dvp) provides the hardware you need to connect your st7mdt10-dvp3 emulator to your application when debugging applications for st7 microcontrollers in sdip32 and so28 packages. connection kit contents one additional 26-pin flat cable required for connection between emulator and the adapter. sdip32 adapter (db585) ? allows the connection of your st7mdt10-dvp3 emulator to your application board in place of your st7 in sdip32 package. sdip32-so28 device adapter (db359) ? adapts the pin out of the sdip32 adapter to the so28 footprint of the st7 on your application board. for more information... st7-dvp3 user manual ? information common to all dvp3 series emulators st7mdt10-dvp3 probe user guide ? information specific to st7mdt10-dvp3 figure 1. sdip32 adapter (db585) figure 2. additional 26-pin flat cable figure 3. sdip32 application board connection figure 4. with dip32-so28 device adapter 1. solder socket to application board. 2. plug flat cables into the corresponding j1 and j2 connectors on the adapter 3. align pin 1 indicators, then insert the pins of the sdip32 adapter into the socket on the application board. pin 1 indicators sdip32 adapter (db585) sdip32-so28 device adapter (db359) www.st.com
ST7MDT10-32/dvp 2/3 revision history figure 5. so28 application board connection date revision changes 12-october-2005 1 initial release. 1. solder the connection pins to your application board. when soldering, insert the connection pins into the device adapter, which serves as a support to ensure correct alignment. 2. plug flat cables into the corresponding j1 and j2 connectors on the adapter 3. align pin 1 indicators, then insert the pins of the sdip32 adapter into the sdip32- so28 device adapter. pin 1 indicators
ST7MDT10-32/dvp 3/3 information furnished is believed to be accurate and reliable. however, stmicroelectronics assu mes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
